The Lancer L5AWM Limited 10/20 gives you a 10-round magazine in a full-size, 20-round L5AWM body, with a permanently installed limiter that keeps it to 10 rounds. It's a steel and polymer hybrid for .223 Remington and 5.56x45mm rifles. Hardened steel feed lips are molded into a proprietary polymer body, and aggressive surface texturing gives you a firm grip.
This magazine can't be disassembled because the floorplate is permanently chemically bonded to the body, and the limiter is built in. Lancer says it reduced the stack travel to make sure no more than ten rounds can go in, so a fully loaded magazine may be hard to insert onto a closed bolt on some weapon platforms. Loading on an open bolt, or loading the magazine to nine rounds, avoids the problem.
Lancer says the polymer body is impact and chemical-resistant, meets or exceeds military testing standards, and was tested from -40F to +180F. The feed lips don't bend, deform, or crack under hard use or extended storage, according to Lancer, and the non-tilt follower with a stainless steel spring lets you store the magazine loaded without degrading performance. Lancer lists the L5AWM Limited as compatible with the M4/M16/AR-15, SCAR16, HK416, ARX160, SIG556, ACR, SIG MCX, IWI Tavor, IWI X95, and SA80, chambered in 5.56x45mm/.223 Remington. It's designed, tooled, manufactured, and assembled in the USA.
IMPORTANT SHIPPING INFORMATION: We cannot ship magazines that hold more than 10 rounds to CA, DC, HI, Cook County IL, IL (rifle), MD, MA, NJ, NY, RI, VT or WA (regardless of if you are a Law Enforcement Officer or not). We cannot ship magazines that hold more than 15 rounds to CO and IL (pistol) or 17 rounds to DE and are unable to ship any magazines regardless of size to CT. We cannot accommodate any requests to disassemble, modify or change items before shipping to make them legal in a certain state. We cannot ship any magazine extension to any state that has capacity limits on magazine size.
This magazine can't be disassembled because the floorplate is permanently chemically bonded to the body, and the limiter is built in. Lancer says it reduced the stack travel to make sure no more than ten rounds can go in, so a fully loaded magazine may be hard to insert onto a closed bolt on some weapon platforms. Loading on an open bolt, or loading the magazine to nine rounds, avoids the problem.
Lancer says the polymer body is impact and chemical-resistant, meets or exceeds military testing standards, and was tested from -40F to +180F. The feed lips don't bend, deform, or crack under hard use or extended storage, according to Lancer, and the non-tilt follower with a stainless steel spring lets you store the magazine loaded without degrading performance. Lancer lists the L5AWM Limited as compatible with the M4/M16/AR-15, SCAR16, HK416, ARX160, SIG556, ACR, SIG MCX, IWI Tavor, IWI X95, and SA80, chambered in 5.56x45mm/.223 Remington. It's designed, tooled, manufactured, and assembled in the USA.
Features
- Lancer L5AWM Limited 10/20 magazine
- Colors: Black and Flat Dark Earth
- Capacity: 10 rounds, in a 20-round-size body
- Caliber: .223 Remington / 5.56x45mm
- Permanently installed capacity limiter; cannot be disassembled (floorplate is permanently bonded to the body)
- May be hard to insert fully loaded onto a closed bolt on some platforms; load on an open bolt or to nine rounds
- Steel and polymer hybrid with hardened steel feed lips molded into the polymer body
- Aggressive surface texturing for grip
- Impact and chemical resistant polymer body, tested from -40F to +180F
- Non-tilt follower with stainless steel spring for loaded storage
- Compatible with the M4/M16/AR-15, SCAR16, HK416, ARX160, SIG556, ACR, SIG MCX, IWI Tavor, IWI X95, and SA80, per Lancer
- Designed, tooled, manufactured, and assembled in the USA
- Intended uses: military, law enforcement, and competition rifles chambered in 5.56x45mm/.223
IMPORTANT SHIPPING INFORMATION: We cannot ship magazines that hold more than 10 rounds to CA, DC, HI, Cook County IL, IL (rifle), MD, MA, NJ, NY, RI, VT or WA (regardless of if you are a Law Enforcement Officer or not). We cannot ship magazines that hold more than 15 rounds to CO and IL (pistol) or 17 rounds to DE and are unable to ship any magazines regardless of size to CT. We cannot accommodate any requests to disassemble, modify or change items before shipping to make them legal in a certain state. We cannot ship any magazine extension to any state that has capacity limits on magazine size.
